A colourless teak oil for pre - and post - treatment of outdoor furniture, hardwood care , outdoor wood surfaces, solid wood and veneers. Made in Germany
Products specifications
Detailed Specifications | Made of natural vegetable oils |
Size (L / ml / g / gal /oz) | 500ml |
Features | colourless |
Application | Scope of application: For outdoor wooden furniture/surfaces; for teak/hardwood/pine, solid wood and veneers; for initial treatment or after-care. Processing: The surface to be treated must be dry and free of any dust and grease. We recommend that you sand the surface before oiling (e.g. with graduated grain size from 180 to 320). Apply an even layer of teak oil with a brush or similar, covering the entire surface. After about 20 minutes, any excess oil should be removed with a cloth, otherwise the surface will become sticky. Then rub the oil into the surface using a rag. Polish the treated area with a cloth after approx. one hour to remove any oil residue. If necessary, reapply oil after 2-4 hours. This will increases resilience. Important: Make sure you thoroughly clean or sand the surface down beforehand to prevent it turning dark or black after application. Any weathered areas that have not been sanded down may turn black after application! |
Other Information | Use for 6–8m² Safety instructions for used cloths: Oil-soaked cloths can ignite themselves!!! Rinse the cloths with water after use. Spread them out on a fireproof surface to dry. Then dispose of the cloths in a sealed container, e.g. in a tin can or in a screw-top jar. Oil-soaked cloths should neither be scrunched up and set aside nor simply be thrown away in the bin! Wash the brush thoroughly with water. Keep out of reach of children! Use outdoors or in wellventilated rooms! Only suitable for use as described |