The anti-slip coating Yachtcare white 1kg applies directly and easily by brush or roller on all polyester laminated supports, old paint and plywood boats. It will hide the existing imperfections avoiding sanding diamond tips and original slip coatings. Features: Topcoat thixotropic polyester Yachtcare Ready to use after adding the hardener included Suitable for implementation on all polyester media - especially on trafficable surfaces such as bridge, bridge or cockpit, and everywhere where one wishes to secure support in wet or heavy seas Colour: white consumption: approximately 200g / m2 Capacity: 1 kg to 5 m2 pot life: 20 min Benefits: Provides better grip even on wet ground that a simple paint in which is incorporated microbeads satin finish which avoids the reverberation phenomenon Does not run Tips: for rounded and curved, stick masking tape limitations the preparation should be applied immediately to the aid? ? a flat brush suitable by spreading the product evenly in a thin layer but covering support offering after the brushing, make a foam roller or mohair repeatedly exerting slight pressure treated surface again walked on after 4 hours Use Yachtcare products safely. Before use, read the label and product information.