Abrasive paste capable of removing very quickly the marks produced by a sanding process with P800 - 1000 grit, depending on the hardness of the resin, including the "snails" resulting from a work with a roto - orbital sander. It is usually applied on molds and hulls. It removes scratches without leaving halos or greasy veils. NW6 paste has a fast and effective polishing action that provides long - lasting cleanliness and depth and is particularly appreciated for its rapid removal of imperfections and optimum polishing in a single step without overheating the surface. Water - based product with low VOC emission, not hazardous to health and environment.Recommended application: To be applied with a disc equipped with a wool or foam pad of hard consistency.Indications for application with disc: Deposit with a spatula or brush a small amount of product on the gelcoat. Work with the disc at low speed spreading with circular and homogeneous movements. If necessary, insist until removing streaks and dirt from the gelcoat. Then increase the speed until a perfectly shiny surface is obtained.
Products specifications
Size (L / ml / g / gal /oz) | 1Kg |