Ais transponder MA - 510TR - Icom

AIS TRANSPONDER MA - 510TR - ICOM all maritime traffic at your fingertips The MA - 510TR offers a large 4.3'' high - resolution color TFT screen with a wide viewing angle for ease of use. Thanks to the colors, you can visualize at a glance your position and that of the other boats. Vessels potentially "dangerous" due to their proximity are displayed in red and vessels registered as "friendly" in yellow. The "Day mode or Night mode" display gives you very good readability whatever the conditions of use Detailed list of AIS targets An AIS (Automatic Identification System) transponder on board ensures maximum safety by allowing you to automatically receive information transmitted by other boats equipped with an AIS system (identity, position, route, status, etc.). At the same time, you constantly transmit your data which can be used by other boats and coastal monitoring stations (CROSS). The "Target list" screen displays all detected targets equipped with AIS (vessels, buoys, etc.). The "Danger" screen displays a list of vessels that are within six nautical miles (CPA) and within 60 min (TCPA) of your vessel. The "Friends list" screen displays detected AIS targets that you have set as friends. To access the target details, simply select it using the arrow keys and press the [ENT] key. You can then navigate to it using the simplified navigation feature. DSC call on an ICOM VHF You can transmit an individual DSC call very simply from a compatible VHF radio* (provide cable). Simply select an AIS target directly on your MA - 510TR** transponder. *Compatible ICOM VHFs: IC - M605EURO, IC - M510E, IC - M506EURO, IC - M506GE, IC - M423GE, IC - M400BB, IC - M400BBE, IC - M330E, IC - M330GE, IC - M323, ICM323G, etc. AIS output on micro - USB AIS data can be used from a PC using a USB cable* connected to the micro USB connector on the back of the transponder (third - party application required). Simplified Navigation Function The navigation function guides you to a specific waypoint or AIS target. You can define up to 100 waypoints (favorite destinations, coves, fishing spots, etc.). Navigating to the MOB waypoint Hold down the [WPT/MOB] button to automatically save your current position as a waypoint and activate the MOB (Man Overboard) navigation function to navigate to the incident location (waypoint). Integrated GPS receiver and antenna The GPS receiver with SBAS precision function is included in the MA - 510TR transponder. The GPS antenna supplied as standard with 10 m of cable allows positioning information to be retrieved NMEA 2000™ connectivity & NMEA 0183 Thanks to the "plug - and - play" characteristics of the NMEA 2000™ communication standard, the MA - 510TR can easily interface with an external plotter, a radar or even a VHF radio and thus benefi t from extended functionalities. In addition, the transponder offers compatibility with the NMEA 0183 HS (High Speed) standard to connect with other compatible equipment. Calculator and anti - collision alarm The anti - collision alarm function makes it possible to be informed of the entry of a boat into the CPA or TCPA zone. In this case, the icon of the target concerned flashes on the transponder screen accompanied by a beep. This functionality can be coupled with an external audio "buzzer" installed on the dashboard or on the bridge in order to warn you of a risk of collision even if you are far from the cockpit. Anchor alarm This handy feature automatically informs you of any drift of your boat at anchor. Other Features - 12V and 24V power supply - User interface