Algaecide and fungicide treatment - SIKA Stop Green - 6L

Algaecide and fungicide treatment - SIKA Stop Green - 6L, ideal to get rid of green traces on facades, floors and roofs without altering the support. The product is easy to use and effective on most substrates (slate, brick, concrete, mortar, plaster, facade, etc.) whether applied vertically or horizontally. Advantages : Applicable horizontally or vertically Easy application, no rinsing required Can be applied on all substrates: slate, shingle, stone, brick, concrete, mortar, fibre cement, plaster, earthenware, polyester, zinc, painted substrates Does not leave traces on materials Preventive effect Can be painted or coated once the green traces have been removed On painted substrates, make a preliminary test and wait at least 72 hours to assess the result (check that the paint is not discoloured) Read the operating instructions carefully Features : Density: about 1 pH value: approx. 8 In dry weather and without rain 48 hours after application. Do not apply by too much heat, on a too hot surface Consumption: 1 litre for 7 to 10 m approximately Capacity: 6L Colour: colourless Reference: 552507 Packaging : 1x Algaecide and fungicide treatment - SIKA Stop Green - 6L Delivered in its original packaging Tips : PREVENTIVE ACTION Treat the substrates in spring or autumn to avoid the proliferation of green traces Apply Sika Stop GREEN directly without dilution to the surface to be treated with a brush, roller, sponge broom or sprayer. Do not rinse. HEALING EFFECT Scratch and brush areas where traces and residues are abundant. Apply Sika Stop VERT directly without dilution and without excess on the surface to be treated with a roller or sprayer until the area to be treated is completely impregnated. Do not rinse and let it work. The green traces will turn blackish and gradually disappear under the action of wind and rain. Repeat treatment if necessary in highly affected areas GOOD TO KNOW Treat surfaces in dry and rain-free conditions 48 hours after application. Do not apply in hot weather or on hot surfaces Disconnect the water recuperators and wait for heavy rain before reactivating them in the event of a roof application. Use Sika products with caution. Before use, please consult the manufacturer's product manual available on the sika.com website.