Anti - mould silicone sealant sikaseal 108 sanitary - white - 300ml x 2 - Sika

Manufacturer: Sika
Manufacturer part number: 524946X2
€18.64
i h
Set of 2 silicone anti - mould mastic SIKA Sikaseal 108 Sanitary - White - 300ml, Anti - mould silicone thanks to a biocidal agent, this mastic has a real resistance to mould and prevents the proliferation of fungi. Ideal for making sanitary joints, it is easy to use and adheres to many substrates without primer. Advantages : A thixotropic sealant that can be used to make vertical and horizontal joints Polymerization under the action of air Contains a biocidal product to effectively control fungi and moulds Can be applied without primer on most substrates Excellent resistance to microorganisms Compliant with EN 15651 - 1, Type F EXT - INT CC class 12.5 E without primer on glass and anodized aluminum Complies with EN 15651 - 3, Type S, Class XS1 without primer on glass and anodized aluminium Read the instructions carefully before use Features : Density: 0.98 - 1.05 Application temperature: + 5°C to + 40°C Curing rate: approx. 2 to 3 mm in 24 hours at + 23°C and 50% RH Skin formation time: approx. 25 minutes at + 23°C and 50% RH Consumption: allows to realize 8 to 9 meters of a 8 x 8 mm flashing joint Colours: white Conditioning: 300ml Reference: 524946x2 Packaging : 1x Set of 2 anti - mould silicone sealant SIKA Sikaseal 108 Sanitary - White - 300ml Delivered in its original packaging Tips : SUPPORT The substrates must be cohesive, sound, dry and clean. Remove all old sealants and any products that may affect adhesion. The substrate must always be dusted and degreased with a clean cloth slightly impregnated with methylated spirits or acetone. For synthetic substrates, degrease with a clean cloth slightly impregnated with Sika Aktivator 205. Before applying the sealant, allow it to dry for at least 15 minutes. APPLICATION Cut off the conical end of the cartridge tip on which the installation cannula is screwed. Then cut the bevel to the desired diameter. Apply the sealant as a continuous joint, avoiding any air inclusion with a manual, pneumatic or electric gun Tighten the sealant against the substrates and then immediately smooth its surface with a finger soaked in soapy water, before it forms a skin, avoiding crushing the joint so that runoff water flows naturally. Allow to dry before commissioning Use Sika products with caution. Before use, please consult the manufacturer's product manual available on the sika.com website.
Products specifications
Silicone / sealant colourWhite
Size (L / ml / g / gal /oz)300ml
ApplicationCut off the conical end of the cartridge tip on which the installation cannula is screwed. Then cut the bevel to the desired diameter. Apply the sealant as a continuous joint, avoiding any air inclusion with a manual, pneumatic or electric gun Tighten the sealant against the substrates and then immediately smooth its surface with a finger soaked in soapy water, before it forms a skin, avoiding crushing the joint so that runoff water flows naturally. Allow to dry before commissioning Use Sika products with caution. Before use, please consult the manufacturer's product manual available on the sika.com website.
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews