BGS Socket and Accessory Sets - in inches - 174 pcs - 9192

Presentation :Socket sets and accessories BGS - in inches - 174 pcs - 6,3 mm (1/4") - 12,5 mm (1/2") - 9192, with this purchase of socket sets you will benefit from not one but two cases in which you will find everything you need for your DIY and mechanical work. One of them contains 130 pieces while the other one has 44 pieces. These parts are noted in inches. Find the description of these two sets below.Advantages:2 complete sets: 1 set of 130 parts, 1 set of 44 partsUse when travelling or in the workshopSizes are noted in inchesFeatures:1st socket set, 6,3 mm (1/4"), 130 piecesReversible ratchet, 6,3 mm (1/4"), fine-toothed, 72 teeth, with quick socket releaseExtension, 6,3 mm (1/4"), 50 mmHandle, 6,3 mm (1/4")Rotary handle, 6,3 mm (1/4"), 150 mmLong hexagonal sockets, 6,3 mm (1/4") female square drive/: 5/32" - 3/16" - 7/32" - 1/4" - 9/32" - 5/16" - 11/32" - 3/8" - 13/32" - 7/16" - 15/32" - 1/2" - 9/16 "Bit adapterBits, male hex drive 6,3 mm (1/4")Bits: Crosshead, length 50 mm: PH1 - PH2Flat, length 50 mm: 4 - 6 mm Wing nut bitInternal hex without front hole, sizes : 1/16" - 5/64" - 3/32" - 7/64" - 1/8" - 9/64" - 5/32" - 3/16" - 7/32" - 1/4"6 inner hexagon with front drilling, sizes: 5/64" - 3/32" - 7/64" - 1/8" - 9/64" - 5/62"6 inner hexagon without front drilling, metric sizes: 1.5 - 2 - 2.5 - 3 - 4 - 5 - 5.5 - 6 - 8 mmInternal hexagon with front drilling, metric sizes: 2 - 2.5 - 3 - 4 - 5 - 6 mmDouble shank: 4 - 6 - 8 - 10 mm T-profile (for Torx) without front drilling: T8 - T10 - T15 - T20 - T25 - T27 - T30 - T35 - T40 T-profile (for Torx) with drilling: T8 - T10 - T15 - T20 - T25 - T27 - T30 - T35 - T40 Female polygon (for XZN): M5 - M6 - M8 Square: S0 - S1 - S2 - S3 Cruciform: PZ0 - PZ0 - PZ1 - PZ1 - PZ2 - PZ2 - PZ2 - PZ3 - PZ3 Cruciform: PH0 - PH0 - PH1 - PH1 - PH2 - PH2 - PH2 - PH3 - PH3 Slot: 3 - 4 - 4,5 - 5 - 5,5 - 6 - 6,5 - 7 - 8 mm 2 lugs: C1 - C2 - C3 3 lugs: 1 - 2 - 3 - 4 - 6 - 8 - 10Internal hex keyways: 1 - 1,5 - 2 - 2,5 - 3 - 4 - 5 mm2nd socket set, 12,5 mm (1/2"), 44 piecesReversible ratchet, 12,5 mm (1/2"), fine-toothed, 72 teeth, with quick socket releaseExtension 12,5 mm (1/2"), 125 mmExtension 12.5 mm (1/2"), 200 mmSlide handle adapter for extension, 12.5 mm (1/2")Joint, 12.5 mm (1/2"),Long hexagon sockets, female square drive 12.5 mm (1/2")/ : 3/8" - 7/16" - 15/32" - 1/2" - 9/16" - 19/32" - 5/8" - 11/16" - 23/32" - 3/4" - 7/8" - 15/16" - 1.1/16" - 1.3/16" - 1.1/4 "Bit adapterBit adapter 8 mm (5/16")Bits, square per male hex 8 mm, (5/16")Phillips: PH3 - PH4 / PZ3 - PZ4Slots: 8 - 10 - 12 mmT-Profile (for Torx) without front hole: T40 - T45 - T50 - T55 - T60T-Profile (for Torx) with front hole: T40 - T45 - T50 - T55 - T60Female polygon (for XZN) : M8 - M10 - M12Hollow hexagon: 7 - 8 - 10 - 12 mmWeight: 5.640 kgPackaging:1 x Socket set 6.3 mm (1/4"), 130 pcs (in inches) + 1 x Socket set 12.5 mm (1/2"), 44 pcs (in inches)Supplied in original packaging