Bostik sealant 106 MSP polymer fixation and sealing translucent x5

MSP Mastic Bostik 106 Polymer mounting and translucent sealing x5 Specially dedicated to bonding or sealing of transparent materials between themselves or on other media (aluminum, stainless steel, galvanized steel, zinc, copper, brass, metal glass, PVC, polyester (GRP), wood ...), except untreated polyethylene, polypropylene and Teflon. Features: Colour: transparent Skin formation time: 20 minutes Time Dust: 50 minutes Cure speed: 3 mm per 24 hours Temperature of implementation: between + 5 C and + 35 C temperature: from - 40 to + 100 C UV resistance and moisture: good Advantages: Does not contain solvents or isocyanates. Good resistance to weathering and UV rays. Does not corrode metals. Good adhesion on damp substrates including (not saturated and dripping). Regains its original properties after compression or elongation. Compatible with most paints. Can be painted after full cure. Tips: MEDIA Adheres without primer on sound surfaces, free of dust, grease-free and all parts brittle. The use of a primer is recommended in case of difficult conditions of implementation (temperature, humidity). SEAL Establishment extrusion, possibly on bottom seal when needed (the depth limitation of the joint 2/3 of its width). After extrusion, tighten and smooth the bead of sealant within 10 minutes with a spatula dipped in soapy water. Avoid that it comes between the mastic and the contact surfaces in order to maintain good adhesion. COLLAGE After extrusion cords on one of the elements, assemble immediately taking care to crush the glue beads. Do not handle the assembly or not to undergo stress bonding for 12 hours. Use Bostik products safely. Before use, read the label and product information.