Sealant Bostik MS 107 white polymer bonding and sealing, damp substrates. COLLAGE: - Flexible bonding elements can undergo vibration or chocs.Collage tiles, skirting boards, decorative elements divers.Collage pipes and downspouts. SEALING: - expansion joints, joints split on concrete, balconies, window sealing sub support, verandas, serres.Calfeutrement masonry, walls, door frames of wood and metal, boats, caravans, car bodies. Features: Colour: transparent Skin formation time: 20 minutes Tack Free Time: 50 minutes Temperature of implementation: +5 to + 35 C temperature: from - 40 to + 100 C Cure speed: 3 mm per 24 hours Advantages: Does not contain solvents or isocyanates. Very good resistance to weathering and UV rays. Does not corrode metals. Excellent adhesion including on damp surfaces (not saturated and dripping). Regains its original properties after compression or elongation. Compatible with most paints. Can be painted after full cure. Tips: MEDIA Adheres without primer on sound surfaces, free of dust, grease-free and all parts brittle. The use of a primer is recommended in case of difficult conditions of implementation (temperature, humidity). SEAL Establishment extrusion, possibly on bottom seal when needed (the depth limitation of the joint 2/3 of its width). After extrusion, tighten and smooth the bead of sealant within 10 minutes with a spatula dipped in soapy water. Avoid that it comes between the mastic and the contact surfaces in order to maintain good adhesion. COLLAGE After extrusion cords on one of the elements, assemble immediately taking care to crush the glue beads. Do not handle the assembly or not to undergo stress bonding for 12 hours. Use Bostik products safely. Before use, read the label and product information.