Ceramic cream, for rebuilding, resistant to tear, wear, acid, oils etc - Wencon

Manufacturer: Wencon
Be the first to review this product
Manufacturer part number: 1016
Vendor: ConceptSRP
€353.76
i h
Wencon Ceramic Cream is a basic two - component, epoxy compound with a wide range of applications for repair and rebuilding of worn, damaged, cracked and corroded metal parts. Wencon Ceramic Cream has a high abrasion resistance, making it suitable for applications on propeller nozzles, rudders, thruster tunnels and housings. In addition, the product also offer high temperature resistance, which makes it ideal for applications on gas scrubbers, condensers and end - covers. Strong adhesion to all metal and GRE surfaces High wear resistance High temperature resistance Easy mixing and application High abrasion resistance
Products specifications
ApplicationApplication areas Wencon Ceramic Cream has a high abrasion resistance, making it suitable for applications on propeller nozzles, rudders, thruster tunnels and housings. In addition, the product also offer high temperature resistance, which makes it ideal for applications on gas scrubbers, condensers and end-covers. Mixing Wencon products are designed to be simple to use and cost effective. Easy mixing ratios (1:2 by volume) reduce waste to a minimum and high specific volume gives high coverage rates.
Detailed SpecificationsMax temperature +200- +300°C (392 – 572° F) Consistency paste Mixing ratio vol. 1:2 Apply with Spatula Potlife at 20°C 30-40 min. mixed in small amounts Curing time 10-15 hours Machineability no Specific volume 538 cm3 / kg Dielectric strength 10 KV/mm
Other InformationInstructions, for use. pair of nitrile gloves. mixing knife. mixing plate.
ColourNatural
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews