Chemical fixation Vinylester VIFIX V + 300ml mixing nozzles

Chemical fixation Vinylester VIFIX V + 300ml mixing nozzles vinylester-based sealing resin without styrene for chemical sealing materials in hollow or solid Specially developed for fixing of threaded rods class 5.8, stainless steel A4, M8 HCR steel M24 and rebar u8 25mm Ideal for fixing heavy materials such as concrete iron, steel structures, metal poles, guard rails, safety railings, elevator guides, powders, industrial machinery, handling equipment, barrier safety, traffic signs ... This product is for use with a caulking gun and a mixing nozzle Use: positioning the cartridge in a caulking gun, remove the cap, screw the mixing tip , to pump out a mortar net and check that the mixture is smooth and direct injection according to the dosage required USER INSTALLATION CHEMICAL SEALING for hollow materials, the diameter of the sieve which determines the diameter of for drilling solid materials is the diameter of the threaded rod which will be your reference which must be added 2mm drill hole to size soignesement dust off the holes by blowing air Place the resin cartridge and cut end (discard the first mix centimeter) inject sealing starting from the bottom of the hole and sufficient for hollow materials only: insert the screen, ensuring that the centering ring is opened and the resin injected into the sieve and close the centering ring, then insert the threaded rod during handling time by turning until it reaches the bottom of the screen to solid materials is the same process but without the screen indication, A a temperature of 5 C, the drying time is 50 min at 20 C wait for 20 min at 30 c wait 15 minutes, and 35 C wait 10min Performance: Suitable for solid or hollow materials for heavy loads and reviews (application over the head) Color: No stone styrene Suitable for applications under water and cold -10 C Excellent chemical resistance Excellent durability: life fixing: 50 years warranty European technical Approval (option7) Application temperature: -10 to 35 C setting time before setting minimum load: -10 C = 90min / -5 to 10 C = 30 minutes / 15 to 35 C = 20min tensile strength with threaded rod M10 grade 5.8 (standard anchorage depth) = 50kg for cellular concrete; 1430kg for concrete C20 / 25; 170kg for the hollow concrete block (with screen 16X85mm) and 50kg for the clay tiles (with screen 16X85mm) Weight: 560g Conditionement: 1 Tube of 300 ml + 1 mixing nozzle Use Batifix products safely. Before use, read the label and product information.