Clipper v2 wind vane anemometer and indicator - hood - MC Technologies

Pack CLIPPER Wind vane anemometer V2 With this Nasa Clipper V2 pack, ready to sail, display the direction and speed of the wind with 32 mm figures for perfect readability. ALL - IN - ONE PERFORMANCE The NASA Clipper V2 anemometer provides, with formidable precision, indications of apparent wind: 360° wind direction, speed (knots or mph) and speed trend. Its ultra - bright 110 x 110 mm analog display allows for clear reading and needle style customization. Equipped with the NMEA 0183 protocol, the Clipper can be connected to any other compatible equipment. CLIPPER V2 INDICATOR The Nasa Marine indicator is connected directly to your wind vane to give you real - time information on wind speed and direction. Its ultra - bright 110 x 110 mm analog display allows for clear reading and needle style customization. ANEMOMETER WEATHERVANE This anemometer wind vane gives indications relating to the apparent wind: the direction of the wind over 360°, the speed (knots, miles or mph) and the speed trend (acceleration / deceleration). Equipped with the NMEA 0183 protocol, the wind vane can be coupled to your navigation software. Supplied with a lighter and thinner 20 meter cable than the previous generation. Even more simple to install in your mast. Characteristics: Pack anemometer Clipper V2 + Indicator - Hood This pack comes with: - 1 aerial complete with 2 fixing lugs and 4 stainless steel screws - 1 x 20m cable - 1 seal (housing) - 1 mounting bracket with butterfly screw - 1 black sealing box - 1 sealing tape, - 1 protective cover - instructions in French.