Coating, white - Wencon

Manufacturer: Wencon
Be the first to review this product
Manufacturer part number: 1020
Vendor: ConceptSRP
€189.46
i h
Wencon Coating is a two - component, liquid epoxy coating suitable for a wide range of applications. It provides a smooth non porous surface, which is resistant to bi - metallic corrosion, light chemical aggression, corrosion and erosion as well as impingement. Typical applications are coating of surfaces rebuild after deterioration, protection of tanks, pumps, valves, wet liners, cooler end covers etc. against corrosion and bi - metallic corrosion as well as a variety of small and large repair and maintenance jobs. Strong adhesion to all metal surfaces and GRE Efficient double coat system Easy mixing and application High coverage rate Fully machinable
Products specifications
ColourWhite
Other InformationInstructions, for use. pair of nitrile gloves. mixing knife. mixing plate.
Detailed SpecificationsMax temperature +60- +250°C (140-482°F) Consistency fluid Mixing ratio vol. 1:2 Apply with spatula/brush Potlife at 20°C 20-30 min. mixed in small amounts Curing time 10-15 hours Machineability yes Specific volume 730 cm3 / kg Dielectric strength 10 KV/mm
ApplicationApplication areas Wencon Coating is used for a variety of small and large repair and maintenance jobs. Typical applications are coating of surfaces rebuild after deterioration. Wencon Coating is used for coating of new parts, or protection of pumps, valves, wet liners, cooler end covers or other surfaces, against corrosion and bi-metallic corrosion. Mixing The Wencon products are designed to be simple to use and cost effective. Easy mixing ratio (1:2 by volume) reduce waste to a minimum and high specific volume gives high coverage rates.
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews