Concentrated water repellent SIKA Sikagard High Protection Facade - 20L, a strong water-repellent power without suffocation of the support. Allows to increase the resistance of the facades and roofs to the soiling and the penetration of runoff water. Invisible treatment with drying time, no alteration of the support. Advantages: Product in water phase with high water-repellent properties Penetrates the supports in depth Improves the resistance of the facades to the penetration of the run-off waters Lets breathe the support while ensuring the water-repellent protection of the building materials Improves the resistance to soiling and decreases the adhesion of mosses, lichens Recoatable by different paints Improves the resistance to soiling and reduces the adhesion of mosses, lichens, etc. Characteristics: Density: about 1 pH value: between 7 and 10 Consumption: On mortar: from 0,15 L to 0,20 L / m - On porous materials: from 0,30 L to 0,50 L / m Temperature of application: + 5 C and + 30 C. Do not apply below 5 C Waiting time: The drying time is a few hours depending on the weather conditions. Must be protected from rain for at least 3 hours Capacity: 20 L Color: milky white Reference: 460392 Packaging: Comes in original packaging Advice: SUPPORT Cement-based substrates must be at least 7 days old to be treated. Surfaces to be treated must be clean, free of dust, oil, efflorescence, old flaking paint, moss and lichen. APPLICATION The product is delivered ready for use and must not be diluted. Shake before use. Apply the product in a single layer by roller or brush for better penetration of the product. The application is saturation from top to bottom, avoiding dripping. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.