Disabling Surface SIKA SikaCem Disabling 4-6 - White - 20L

Surface deactivator SIKA SikaCem Disabling 4-6 - White - 20L, powerful curing power, a deactivation between about 4 and 6 mm. This product has anti-spotting properties and an appearance of the type "washed gravel" for a more pleasant aesthetic appearance. Advantages: Aesthetic appearance of the type "washed gravel" with a depth of deactivation between 4 and 6 mm Anti-slip: reduces the risk of slips for pedestrians Ready to use Read the instructions before use Characteristics: Density: ? 1 pH : ? 4,0 1,0 Application Temperature: + 5 C minimum to + 35 C maximum Consumption: 4 to 5 m per liter Color: White Reference: 538132 Packaging: Comes in original packaging Tips: SUPPORT Protect work area from accidental splashes when spraying or washing with SikaCem Film or plastic film. Application Homogenize the product before use by shaking the can vigorously. Upon completion of the float, spray SikaCem Deactivator 4-6 with a sprayer equipped with a metal nozzle evenly, in a single step, over the entire surface of the concrete to be treated. For more efficiency when washing, pre-wet the surface by basting, and leave a few minutes. The washing of the surface will be carried out with a jet of water at high pressure (from 100 to 150 bar maximum). The deactivation range starts according to the climatic conditions (temperature, sun, wind), between 5 hours and 24 hours. In case of rain in less than 3 hours after its application, it is necessary to provide a new product spray or ensure the protection of the treated surface. Note: If the aggregates come loose during washing, reduce the wash pressure or increase the waiting time. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.