Disabling Surface SIKA SikaCem Disabling 4-6 - White - 5L

Surface deactivator SIKA SikaCem Disabling 4-6 - White - 5L, a ready-to-use product that reduces the risk of slipping concrete floors. The deactivation depth is about 4 to 6 mm. Advantages: Aesthetic appearance of the type "washed gravel" with a depth of deactivation between 4 and 6 mm Anti-slip: reduces the risk of slips for pedestrians Ready to use Read the instructions before use Characteristics: Density: ? 1 pH : ? 4.0 1.0 Application Temperature: + 5 C minimum to + 35 C maximum. Consumption: 4 to 5 m per liter Color: White Reference: 537977 Packaging: Comes in its original packaging Advice: SUPPORT Protect the surroundings of the construction site accidental projections when spraying or washing with SikaCem Film or with a protective film plastic film. Application Homogenize the product before use by shaking the can vigorously. Upon completion of the float, spray SikaCem Deactivator 4-6 with a sprayer equipped with a metal nozzle evenly, in a single step, over the entire surface of the concrete to be treated. For more efficiency when washing, pre-wet the surface by basting, and leave a few minutes. The washing of the surface will be carried out with a jet of water at high pressure (from 100 to 150 bar maximum). The deactivation range starts according to the climatic conditions (temperature, sun, wind), between 5 hours and 24 hours. In case of rain in less than 3 hours after its application, it is necessary to provide a new product spray or to ensure the protection of the treated surface. Note: If the aggregates come loose during washing, reduce the wash pressure or increase the waiting time. Use Sika products with care. Before use, please consult the manufacturer's product leaflet available on the sika.fr website.