Elastic adhesive SIKA SikaBond 54 Parquet - 13kg - To be used before 04/04/2020

DEADLINE FOR USE: 15/04/2020 Elastic adhesive SIKA SikaBond 54 Parquet - 13kg - To be used before 04/04/2020, suitable for gluing most common parquet floors and for laying over underfloor heating. This product will surprise you by its ease of use, its fast polymerization and will allow you to reduce the sound of impact noises. Advantages : Single component, ready to use Fast polymerization Easy to implement Sanding of glued parquet after 12 hours at +23C and 50 % RH (spatulas B6 and B11) Elastic glue which reduces the sound of impact noises Suitable for gluing most common parquet floors Especially suitable for nervous woods such as beech, maple and bamboo. Suitable for gluing parquet directly onto old tiles Reduces stress on the subfloor: the elastic adhesive reduces the propagation of stress between the parquet and the subfloor. Suitable for laying on underfloor heating SikaBond 54 Floor can be sanded Features : Density: approx. 1.29 Skin formation time: approx. 60 min. at +23 C and 50 % RH Polymerisation rate: > 4.0 mm / 24 hours at +23 C and 50 % RH Colour: brown Consumption: 700 to 900 g/m with a notched spatula B6 / 800 to 1000 g/m with a notched spatula B11 Capacity: 13kg Reference : 421469 Features : 1 x Elastic adhesive SIKA SikaBond 54 Parquet - 13kg - To be used before 04/04/2020 Delivered in its original packaging Tips : SUPPORT Apply the product on a dry, cohesive, saim, clean, homogeneous support, free of all traces of grease, dust and other poorly adhering particles. In addition, in all cases the supports must be : Flat, stable and be adherent to their support, have a direct tensile cohesion of at least 0.5 MPa, be free of any product that may affect the adhesion of any primer and adhesive. The substrates suitable for glued parquet are defined in DTU 51.2. APPLICATION SikaBond 54 Parquet is applied to the carefully prepared substrate directly from the bucket or bag and evenly distributed using the notched trowel. Thoroughly embed the floorboards in the glue so as to obtain a good adhesion on all their underside. The blades can then be tightened with a hammer and an intermediate piece. Many types of flooring must be beaten from above for clamping. A peripheral joint of between 10 and 15 mm must be respected at the junction of the parquet floor, walls and joinery. Excess uncured adhesive must be removed immediately from the surface of the flooring with a clean cloth and, if necessary, with Sika Remover 208 or Sika Clean impregnated wipes. Compatibility tests between the flooring and Sika Remover 208 should be carried out prior to use. Parquet floors must be laid in accordance with DTU 51.2, and with the parquet manufacturer's specifications (humidity level, peripheral joints, joints between strips, etc.). Use Sika products with care. Before use, please consult the manufacturer's product manual available on the sika.com website.