EP1 Electric 12V high pressure pump for inflatable SUP - inflates up to 16psi - 110W - SCK

SCK EP1 Electric pump for inflatable SUP or kayak High Pressure – Reaches up to 16psi for a rigid board Connects to a car outlet – 12 Volt With this electric pump you can enjoy your time at sea with your friends and family and not sweat inflating your SUP or kayak. Yes, inflation is a good warm - up before getting in the water, but how often do you want to warm - up on a hot day? A valuable accessory for any inflatable SUP/kayak owner! Characteristics ● Voltage:12 Volt DC ● Rate of flow inflateing: 90L / min. ● Power: 110W ● Materials: ABS+PA ● Manual pressure adjustment with knob. ● Reinforced hose with high pressure valve for reliable use. Take a look… ● With this pump you can inflate anything that has the appropriate valve (H3) by adjusting the air pressure to the desired. Maximum pump capacity is 16 psi. ● The pump will turn off automatically as soon as it reaches the default pressure you have set. ● The pump is safe and will stop working automatically if it overheats. However, do not leave it unattended. ● The time that the board will inflate depends on the amount of liters of air per minute that the pump injects and the size of the board. Watch out for... ● The pump sucks air to inflate. You must pay attention to the point where you place the pump when it works. Do not leave it on the sand or in dirty places and do not block the airways. Ideally leave the pump on the SUP while inflating it. ● The pump is neither waterproof nor shockproof.