epoxy-type resin 250g R123 Soloplast

The epoxy resin-type R123 Soloplast 250g is a resin lamination and recovery. Fluid and transparent, it has a dry surface after curing. It is used for parts of castings, polystyrene foam coverings, polyurethane, crosslinked PVC. It is also suitable for protecting aquarium decorations (under certain conditions). Features: Resin Type R123 quality epoxy hardener epoxy-type R614 included Color: Transparent Can be colored Contents: 250 g hardener included Pot life of the mixture: 1 hour at 20 C Application with glass cloth on ferrous metals, wood, concrete, polyester and polystyrene Proportions of use: weight: resin 100g - hardener 45 g - volume: 100 resin parts - hardener 49 shares density: 1.05 Advantages: fluid resin may be colored if required 100% waterproof No Presents solvent a dry surface after curing can also be used in aquarium Tips: shake both components before mixing. Observe the proportions indicated on the can of hardener. Use preferably at 20 C. Apply resin on the support, if necessary apply a glass cloth to consolidate your room. Keep out of the reach of children, harmful by inhalation, in contact with skin and has not swallowed. Do not eat and do not drink during use. Do not breathe vapors, wear suitable protective clothing, gloves and a camera eye protection / face protection. Please note that this resin does not hadre on ABS, polyethylene and polypropylene. Preservation of the product at least 12 months in tightly closed container at 20 C. Use Soloplast products safely. Before use, read the label and product information.