Fire classified putty for expansion joints and caulking - SIKA Sikasil 670 Fire - Grey - 600ml

Manufacturer: Sika
Manufacturer part number: 483493
GTIN: 7612895181646
€20.50
i h
Fire classified putty for expansion joints and caulking - SIKA Sikasil 670 Fire - Grey - 600ml, is a fire classified putty designed to make expansion joints and caulking that adheres to porous and non-porous substrates such as concrete, mortar-cement. Advantages : Fire resistance up to 4 hours according to EN 1366-4 Very good weather resistance Movement capacity of 35% (ASTM C 719) Easy application and smoothing Good adhesion on many different substrates Neutral polymerization Features : Density: ~1.35 kg/l Curing rate: ~2 mm/24 hours (23 C / 50% RH) Skin formation time: ~25 min (23 C / 50% RH) Set-up time: ~20 min (23 C / 50% RH) Colour: Grey Packaging: 600ml Reference: 483493 Packaging : 1x Fire classified putty for expansion joints and caulking - SIKA Sikasil 670 Fire - Grey - 600ml Delivered in its original packaging Tips : The substrate must be clean, dry, sound, and homogeneous, free of oils, grease, dust and loose or friable particles. Sikasil 670 Fire adheres without primer or activator. Cement laitance must be removed. Sikasil 670 Fire is supplied ready for use. After the necessary preparation of the supports, install in the joint to the required depth, a joint base of section adapted to the width of the joint. If necessary, apply a Sika primer. Install the cartridge or refill in a putty gun. Extrude Sikasil 670 Fire into the seal and press it onto the lips of the seal, making sure they are in good contact with them. Fill the joint continuously and avoid any inclusion of air bubbles. Sikasil 670 Fire must be tightened firmly against the lips of the joint to allow good adhesion. It is recommended to use backing strips if clean, straight edge joints are required. Remove the strips before the sealant forms a skin. Do not use any smoothing agents containing solvents. Clean all tools and application equipment immediately after use with Sika impregnated wipes. Once cured, product residues can only be removed mechanically.
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews