FLIPR HUB Connected Controller for Swimming Pools

Connected controller FLIPR HUB for Swimming Pool, allows you to control your pool remotely from your smartphone. Easily control your equipment: Up to 20% savings on your electricity budget thanks to Flipr Hub's advice. Advantages : Easy to install Save money with FLIPR Hub's advice Control your pool remotely from your smartphone Features : Flipr Control : No more going back and forth in your technical room, and no more incessant changes to the filtration program. Flipr Hub allows you to remotely control your pool, wherever you are, from your smartphone. Turn your equipment on and off as you see fit. From the application, easily switch from manual mode to programming mode without having to change anything on your equipment. Flipper Timer : Each device can be programmed from the application. Filtration, lighting, heat pump: choose the different daily operating slots. You can change them at any time, according to Flipr's advice or your own wishes. Flipr Smart-Control : The Infinite features allow you to further automate your pool and enjoy exclusive functions. Connect your Flipr analyser ("Start", "Start Max" or "2" model) to your Flipr Hub, and your pool becomes an intelligent and autonomous pool, thanks to our technology based on artificial intelligence. Turn on the light automatically when you are close to the pool, suspend or turn on the filtration automatically when you go swimming: your pool recognizes you and waits only for you! Features : Dimensions: 161 x 160 x 77 mm Weight: 700 g Connection : Wifi 802.11 b/g/n 2.4 GHz + Bluetooth: BLE (Bluetooth Low Energy) 4.0 + api cloud Compatibility: Chlorine, bromine, or salt pools. Liner, shell or tile coating. Automatic shutter and bubble cover. Waterproofing IP x8 CE compliant Power supply: On the power cable of the equipment Maximum voltage: Single phase 240V AC Three phase 380/400 V AC Maximum admissible current: 10A per phase Maximum allowable power: 5kW / 3HP Maximum operating altitude: 3500m Interface: Mobile smartphone application (minimum requirement iOS 10 or Android 4.4) Content: Flipr connected device + mobile application access + legal notice (Smartphone not included) Packaging : 1 x FLIPR Hub Advice for use : In case of doubt about the installation, contact a qualified technician in order to check the technical room. It is imperative to cut off the power supply to the appliance and any other equipment connected to it before carrying out any technical work on the appliance. Always replace and tighten the cable protectors before using the product. Do not install the unit in damp, unventilated rooms or in rooms exposed to external corrosive agents. Do not install the unit in a place where there is a risk of contact with water. Never work on the unit with wet hands and/or feet or bare feet. Do not disassemble the unit. Keep out of the reach of children. The product must be in a protected and controlled environment. It must not come into contact with rain, splashes, high humidity, etc. The installation of the Flipr HUB requires precautions regarding electrical installations. Please refer to the manual for all legal indications and provisions. Installation with : Drilling machine with adapted drill bit diam. 6mm and 8mm flat spanner