Full 3M 6800 mask

Full mask 3M 6800 which ensures effective protection, light and comfortable against particles, vapors and gases. Extremely lightweight and with a wide field of vision, it will protect the entire face without hindering however its user. Bi-filters and equipped with bayonet mounting system 3M, the 3M full face 6800 (standard size) is compatible with a wide range of 3M filters. Filters sold separately click here Features: Height: dual filters Concept standard for lower respiratory resistance level mask protection depends on the filter used among the 2000 series, 5000 and 6000 Large field of vision voice transmission area soft Face piece silicone ultra comfortable panoramic visor scratch resistant polycarbonate (EN166: 2001 B) 4-point harness well balanced and easy to adjust patented exhalation valve 3M T Cool Flow T that limits the breathing resistance inside the mask Lightweight: 400 g that provide very comfortable Advantages: comfortable Reusable Easy handling extremely lightweight full facial protection minimum Maintenance Tips: the user must read the instructions before use. It is recommended to clean the mask after each use. Reset anti-gas and / or particulate filters. Can only be used in places convenablementventils and whose oxygen content is sufficient for life. Do not use when concentrations of contaminants are immediately dangerous to life. Leave immediately if: breathing difficulty, dizziness or other distress occurs, discard and replace the mask if it is damaged or if the breathing resistance becomes excessive or at the end of each working day. Never modify or "tinker" this device. Failure to observe the instructions and precautions for use of this product, as well as the failure of continuous wear the mask instructions for the entire period of exposure to the contaminant may decrease the effectiveness of the product and affect health user, exposing it to serious or putting life threatening disorders.