Gelcoat Finish Soloplast White 250g with Hardener is a thick, white finish resin that hardens to give a dry, matte surface due to the paraffin contained in the product. Its hardening is obtained by adding 1.5 to 2% of CHP catalyst. It is used in covering for finishing tanks, tanks, basins and polyester parts. It can only be repainted after intensive sanding. Characteristics: Soloplast finishing resin Type Top Coat Pre - accelerated, waxed topcoat Food neutrality obtained by steaming and splashing Colours: white Surface matte Capacity: 500 gr CHP hardener included Consumption per m²: 250 to 300 g Pot life at 20 ° C after addition of the catalyst: 10 - 20 minutes Without styrene Advantages: Use: on any polyester resin laminate Gives a dry surface to the touch Excellent sanding Very low porosity Advice: Keep your product in its original box closed at 20 ° C at least 6 months) In the case of tanks or tanks intended to receive water for food use, we advise after a month's stay in the open air, to wash with water hot, about 80 °, for 2 hours then rinse with warm water and finally rinse with plenty of water Do not work above 25 ° C because taking too fast and poor recovery paraffin Atten Product Flammable, Harmful by inhalation, Keep product out of the reach of children. Use Soloplast products with care. Before use, read the label and product information.
Products specifications
Application | 500g for 2m² |
Gel coat colour | Matt Surface White |