Gelcoat finishing with hardener 500g - white - Yachtcare

Gelcoat Finish Soloplast 500g white with hardener is a thick, white finish resin that hardens to give a dry and matt surface due to the paraffin contained in the product. Its hardening is obtained by adding 1.5 to 2% of CHP catalyst. It is used in covering for finishing tanks, tanks, basins and polyester parts. It can only be repainted after intensive sanding. Characteristics: Finishing resin Type Top Coat Pre - accelerated top coat, waxed Food neutrality obtained by steaming and splashing Colours: white Matt surface Capacity: 500g for 2m² Hardener CHP included Consumption per m²: 250 to 300 g Pot life at 20 ° C after addition of the catalyst: 10 - 20 minutes Without styrene Advantages: Use: on any polyester resin laminate Gives a dry surface to the touch Excellent sanding Very low porosity Advice: Keep your product in its original box closed at 20 ° C at least 6 months) In the case of tanks or tanks intended to receive water for food use, we advise after a month's stay in the open air, to wash with water hot, about 80 °, for 2 hours then rinse with warm water and finally rinse with plenty of water. Do not work above 25 ° C because taking too fast and poor rise of paraffin Product attention flammable, harmful inhalation, well keep the product out of the reach of children Use Soloplast products with care. Before use, read the label and product information.