Gelcoat with hardener 500g - white - Yachtcare

Soloplast gelcoat 500g white with hardener Nécéssaire for sealing and perfect finish during manufacturing of polyester parts, this Soloplast white gel gel casting resin is very thick and creamy consistency. Supplied with its CHP hardener included, it will always remain sticky to allow a perfect bond with resin and fiberglass. Characteristics: Polyester gel coat resin Very thick with a creamy consistency Colours: white Capacity: 500 gr CHP hardener included Pot life at 20 ° C after addition of 2 to 3% of catalyst: 10 to 15 minutes Consumption per m2: 600 gr approximately Application brushless Styrene free Advantages: Stable in light Thixotropic (non - flowing), non - porous Isophthalic (water - resistant) Tips: Brush - applied resin. After waxing and polishing the mold with the wax or release spray, apply the gel coat in a single thick layer avoiding brush marks. To make it easier to apply, you can hold the coated brush without pressing too hard. It is even better to be extra thick. The preservation of the product, in box of origin closed is at least 6 months at 20 ° C. Use Soloplast products with care. Before use, read the label and product information.