Glue for assembling small stone barbecues - SIKA SikaColle BBQ - Light beige - 500g

Glue for assembling small stone barbecues - SIKA SikaColle BBQ - Light Beige - 500g, is a ready-to-use acrylic glue suitable for gluing prefabricated outdoor elements. Advantages : Easy to apply, quick to set, it is suitable for outdoor gluing. Very good adhesion on most substrates: concrete, mortar, stone, brick, sandstone, earthenware, reconstituted stone, terracotta, glass paste and fibre cement. Can be used even on slightly damp substrates. Good resistance to moisture and heat after curing. Features : Density: about 1.8 Glue joint thickness: allows to fill a gap between elements to be glued from 1 to 8 mm Substrate temperature: + 5C minimum to + 30C maximum Open time: about 30 minutes at + 20 C and 50 % RH Curing speed: assemble the elements within 30 minutes maximum after application and possibility to adjust the elements without peeling them off within an hour of the start of the application Return to service at + 20 C: approx. 48 hours Rain resistance: about 8 hours Colour: Light beige Packaging: 500g Reference: 428330 Packaging : 1x Glue for assembling small stone barbecues - SIKA SikaColle BBQ - Light Beige - 500g Delivered in its original packaging Tips : The substrates must be sound, clean, free of dust, laitance and traces of oil. Brush thoroughly and clean if necessary. Cut the nose of the cartridge. Screw in the bevelled cannula. Apply the glue in a triangular bead of about 1cm on each side. The gun must be held perpendicular to the support while reversing. Then apply the 2nd element to be assembled by compressing the glue joints, quickly clean the burrs if necessary.