Grement Dacron X Move Rig Mat Alu - Nautix

Grement Nautix Dacron X Move Rig Mat Alu With specific reinforcements, the range of Nautix X-Move Dacron sails is particularly suitable for intensive use of sailing school. Stable and handy, they will accompany you from your beginnings to your first schedules. The new junior fiber masts 4M and RDM 3.15 and 3.70m give the beginner a better understanding of the wind while hosting the occurrences with ease. The aluminum alloy, a 5086 reference, implemented for the manufacture of wishbons, masts and extensions, has been selected because it is best suited to resist corrosion in the marine environment. To strengthen this corrosion resistance, all tubes are anodized, outside and inside, at a thickness of 7µ. Wishbones. Diameter of the tubes 25 mm for children's sails: 1.50 m², 2.00 m² and 2.50 m² Tubes diameter 28 mm for junior sails: 3.00 m² 3.50 m², 4.00 m² and 4.50 m² of tubes 30 mm for adults or juniors Heavy: sails of 5 and 6 m². All wishbones are equipped with the front handle with leverage with non -slip and mast protection pads. They are all covered with glued foam sheath. The rear tip has a shimmer cleaner and two pulleys. Masts. Each part of all masts is equipped with traffic jams. On aluminum masts, the area where the wishbone is placed is increased: non -slip. The aluminum masts indicated 36/32 mm are built with the lower part diameter 36 and the upper diameter 32 mm, which has a harmonious curve and limits the tension on the fall of the sail. They exist in: 32/28, 36/32, 40/36 and, for masts in three parts, in 40/36/32 mm. The masts called "aluminum/fiber" have the lower aluminum part diameter 40 mm and the upper part in epoxy glass composite, 36 mm diameter, to better absorb flexion, especially for sail centers located on a spot with a little of Shore Bracke. For the 3.5m² rigging: Aluminum mast 40/36/32 LG 3.85ml Wish28 LG 1.45ml