Hand Dryer Faucet Long DYSON Airblade TAP AB10

DYSON Airblade TAP AB10 Long Hand Dryer, forget the water on the floor thanks to the Dyson Airblade technology integrated into a faucet. Low running costs and low impact on the environment Advantages: Space saving thanks to a combination of hand dryer and faucet. Low operating cost, up to 80% lower than other hand dryers. Low environmental impact Activation by infrared detection, without contact with the device Digital engine reprogrammed for a quieter device. Fast drying thanks to air slides circulating at 690 km / h, for drying in just 12 seconds. Features: Input frequency: 220-253V; 50 Hz Rated power: 1600 W Motor type: Dyson digital motor, brushless, DC. Engine speed: 90,000 rpm Filter: HEPA (glass filter and felt pre-coat) Non-contact operation Drying time: 12 sec Automatic switch-off time: 30 seconds Air speed: 690 km / h Water flow: 4l / min Faucet with aerator Thermostatic mixer not supplied Required water pressure: 1-8 Bar Recommendations for the basin: The Dyson Airblade Tap hand dryer is compatible with most basins. Make sure that the bowls are equipped with a free-flow drain. Washbasin dimensions: All measurements are taken inside washbasins unless otherwise specified. Dimensions from left to right: 350 mm minimum Dimensions from front to back: 300 mm minimum Maximum depth of the basin: 200 mm (external measurements) Materials of the basin: the bowls with polished surfaces must be avoided (eg reflective materials ). Those made of porcelain or brushed metal are recommended. Where more than one appliance is installed side by side, the tap centers must be at least 580 mm apart. Packaging: DYSON Airblade TAP AB10 Long Hand Faucet Delivered in its original packaging Warranty: Dyson 5 year parts and labor warranty.