High performance hard matrix antifouling paint for regatta and power boats - A4T.speed - grey - 750 ml - Nautix - Grey - 750ml - Nautix

Manufacturer: Nautix
Be the first to review this product
Manufacturer part number: 150760
GTIN: 3.66081E+12
Vendor: Vinco SRLS
€137.89
i h
Nautix A4T.Speed TM is high performance hard matrix antifouling paint especially recommended for regatta - and power - boats. The “T.SpeedTM ” means super smooth friction free surface and reduces turbulence to increase speed or save fuel. This antifouling is selected by the most prestigious racing boats and skippers worldwide and became a reference for all racing boats.
Products specifications
Detailed SpecificationsFinish Matt Coverage 10m²/L per layer (roller/brush) Flash point 21°C < FP < 55°C Unit size 0,75L - 2,5L - 20L Typical shelf life 3 years Thinner/Cleaner Nautix DA
WarrantyThis product is covered under 1 year standard warranty from date of purchase
ApplicationApplication methods : brush, roller, conventional spray gun, airless . • Apply between 10 and 30°C (ideally inside with hygrometry rate no greater than 85%). • Do not apply when there is a chance of condensation forming on the substrate (Dew-Point) : substrate, ambient air and product temperatures must be close. • Avoid applying in adverse weather conditions : strong wind, strong sunlight, high/low temperatures, high humidity or rain. • Important : Antifouling efficiency depends directly on applied film thickness. Apply the whole recommended quantity (excl. thinner) : 2 thick layers and 3 rd layer on leading and trailing edges (waterline, keel, rudder,...). Be careful when adding solvents to antifouling as this will reduce the thickness applied. • Maximum immersion time : several weeks if the boat is stored in good conditions (no dust).
Size (L / ml / g / gal /oz)750ml
Antifouling colourGrey
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews