Nautix A9 T.SPEEDTM is fluorescent hard matrix antifouling especially recommended for keel and rudder of regatta - boats. This antifouling has been selected by the most prestigious racing boats and skippers worldwide. This fluorescent paint is very helpful for coastguard to localize capsized boats. Some yacht class rules impose it to competitors. It helps for keel and rudder inspection during races (plastic bags, ropes, nets...). Formulation is optimized to resist to friction wear due to fishing ropes, cavitation, etc.
Products specifications
Size (L / ml / g / gal /oz) | 750ml |
Application | Substrate must be clear, ideally previously painted with Nautix A4T.Speed TM White. • Application methods : brush, roller, conventional spray gun, airless. • Apply between 10 and 30°C (ideally inside with hygrometry rate no greater than 85%). • Do not apply when there is a chance of condensation forming on the substrate (Dew-Point) : substrate, ambient air and product temperatures must be close. • Avoid applying in adverse weather conditions : strong wind, strong sunlight, high/low temperatures, high humidity or rain. • Important : Antifouling efficiency depends directly on applied film thickness. Apply the whole recommended quantity (excl. thinner) : 2 thick layers and 3 rd layer on leading and trailing edges (waterline, keel, rudder,...). Be careful when adding solvents to antifouling as this will reduce the thickness applied. • Maximum immersion time : several weeks if the boat is stored in good conditions (no dust). • Clean your tools with Nautix DA |
Antifouling colour | Yellow fluorescent |
Warranty | This product is covered under 1 year standard warranty from date of purchase |
Detailed Specifications | Finish Matt Coverage 10m²/L per layer (roller/brush) Flash point 21°C < FP < 55°C Unit size 0,75L - 2,5L - 20L Typical shelf life 3 years Thinner/Cleaner Nautix DA |