HighPower EMFI Turbo Putty - White 290ml

Manufacturer: Emfi
Manufacturer part number: HPTURBOBLC
GTIN: 3660099023815
€14.99
i h
HighPower EMFI Turbo Putty - White 290ml, high viscosity, high modulus, single-component elastomer putty, based on new generation polymer, it has good adhesive properties, high immediate setting and fast skin formation time. Advantages : High viscosity and high modulus single-component elastomer mastic, based on new generation polymers. It has good adhesive properties, high immediate setting and fast skin formation time. Forms a flexible joint with high tear resistance Features : Single-component elastomer putty Colour: white Appearance: pasty Density at 20: 1.50+-0.02 Operating temperature: 5-35C Temperature resistance: -40 - 90C Tips : SUPPORTS The substrates to be assembled must be clean, flat, dry, free of dust, grease or other polluting agents that could interfere with the bonding. If the substrates have to be cleaned, use EMFINET 683, methyl ethyl ketone (MEC), acetone or the degreaser SAPOCOL GR 1001. For materials sensitive to ketones, use EMFINET 688/1 or ethanol. DIRECTIONS FOR USE If necessary, apply a primer - consult our technical department if necessary. It is recommended to strip the concrete, especially the cement laitance, with a wire brush and then remove the dust. If necessary, sand metal surfaces (especially in the presence of oxidation). After sanding, clean them again with a solvent, observing an evaporation time of 10 minutes. Packaging : 1 x HighPower EMFI Turbo Putty - White 290ml Delivered in its original packaging
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews