Treatment pH plus for swimming pool HTH - 10L, It raises the pH of the water of swimming pool to improve the comfort of the bathing. It optimizes the efficiency of the disinfection product. Advantages : Improves bathing comfort Proper pH adjustment optimizes the effectiveness of the disinfectant. Non-foaming Easy dosage: Graduated canister Compatible with all filtration equipment Features : High average active ingredient content: 29%. Can of: 10 liters Dosage: 100 ml per 10m3 Part Number: AWC-500-6556 Packaging : x1 pH minus treatment for swimming pool HTH - 10L Delivered in its original packaging Precaution of use: Make sure that the filtration is on. Pour the product directly into the basin, as close as possible to the surface in front of the discharges (if any). To increase the pH of a moderately alkaline water by 0.2 units (T.A.C. around 100 mg/l), it is necessary to provide about 100 ml of product for 10m3 of water. Easier to use than with homologous powdered products. A well adjusted pH is necessary to guarantee an optimal action of chlorine or bromine and to ensure satisfactory bathing conditions. Never pour water on this product. In contact with too small volumes of water, this product may react violently (heat, toxic gases, splashes, etc.). May prove fatal if swallowed, never pour the product on the surface of the water in the presence of bathers. Before using this product, you must read all the instructions and safety instructions. Contamination or improper use of this product may cause fire, explosion, or the release of toxic gases. Store in a dry, ventilated place at an average daily temperature not exceeding 35C.