I'd evac descender - Petzl

I'D Evac descender - PETZL The I'D Evac self - braking descender is mainly intended for evacuations at anchor. Specifically oriented for the handling of loads at anchor, the ergonomic handle allows comfortable control of the descent. The integrated anti - panic function and the error warning trigger limit the risk of accidents in the event of incorrect use. The Auto - Lock system allows the rope to be locked automatically, without having to manipulate the handle and make a stop key. Once blocked, the rope can be taken up without having to manipulate the handle. The locking pawl allows the rope to be installed while keeping the device connected to the anchor. I'D Evac is compatible with ropes from 10 to 11.5 mm and allows the handling of loads up to 250 kg. Designed for evacuations at anchor. Ease of use : - Has a locking ratchet on the movable flange allowing easy installation of the rope, while keeping the device connected to the anchor, - Easy installation of the rope, thanks to guidance and indicative markings, - Error indicator trigger to limit the risk of accident due to incorrect installation of the rope, - Ergonomic handle to release the rope and comfortably control the descent. Two possible descent modes: on the flange or in the V - shaped braking groove. The handle is specifically oriented for handling loads at anchor, - Anti - panic function automatically stopping the descent if the user pulls too hard on the handle, - Auto - Lock system allowing the rope to be locked automatically, without having to manipulate the handle and make a stop key. The automatic return of the handle limits the risk of involuntary snagging, - Automatic passage of the handle to the storage position when the rope is removed from the device, which reduces the risk of involuntary snagging when the descender is worn on the harness. Versatility of use: - Once locked, the rope can be pulled back without having to manipulate the handle, which makes a haul system reversible, - Screw for locking the mobile flange in order to integrate the I'D EVAC into the evacuation kits, - Open additional brake allowing to increase the braking according to the load and the diameter of the rope and to install or release the rope at any time. Protective reinforcement, in stainless steel on the friction zone of the rope, allowing to increase the resistance to wear. Lowering of heavy load up to 250 kg. Rope compatibility: 10 to 11.5 mm in diameter. - Material(s): aluminium, steel, polyamide. - Weight: 615g. - Maximum working load: 250 kg. - Certification(s): EN 341 type 2 class A, CE EN 12841 type C, ANSI Z359.4, NFPA 1983 Technical Use, EAC - - EN 341 type 2 class A when used with a PARALLEL 10.5 mm or AXIS 11 mm rope, - - EN 12841 type C when used with an EN 1891 A rope from 10 to 11.5 mm, - - ANSI Z359.4 when used with 10 to 11.5 mm rope, - - NFPA 1983 Technical Use when used with 10 - 11.5mm rope.