Kit SIKA anti-humidity - InjectoCream 20m - Imper wall 2L,This pack will allow you to control the rise of humidity in interior and exterior walls and to treat your damp walls. After the product is injected, it diffuses into the damp wall to form a barrier that blocks water and prevents the appearance of humidity. It can be used in practically all types of masonry walls (brick and natural stone walls, hollow walls, buried walls and randomly shaped stone and rubble fill walls). Advantages : SikaMur InjectoCream Pro Anti-Humidity Kit - 20m Concentrated formula with about 80% active ingredients giving much more effective results compared to less concentrated products. Easy to use. Quick application (no "double drilling", no need to wait for the liquid to penetrate under pressure or gravity). It is not necessary to seal around the boreholes beforehand. Constant product consumption (easy to calculate the quantity of product required). Does not require a special and expensive injection pump. No risk of increased efflorescence. Imper wall resin 2L Forms an impermeable barrier after drying that prevents the formation of mould and saltpetre. Low viscosity, penetrates deeply into the substrate. Almost invisible after drying Can be covered with paints and wallpaper Features : SikaMur InjectoCream Pro Anti-Humidity Kit - 20m Density: approx. 0.9 (at 20 C) Application Temperature: at +5C during and at least 48 hours after Application. Colour : White Kit 20m: including 5 pockets of 600 ml and 1 gun with 3 nozzles 20 linear metres Imper wall resin 2L Density: about 1 pH value: approx. 7.5 Colour: white, colourless after drying Media temperature: between +5C and +30C Consumption: from 200 to 300 g/m depending on the porosity of the support. Packaging : 1x SikaMur InjectoCream Pro Anti-Dampness Kit 1x Resin Imper wall 2L Delivered in its original packaging Tips : Use Sika products with care. Before use, please refer to the manufacturer's product manual available on the sika.co.uk website.