M12 threaded rods pack of 6 - M12x115mm - Batifix

Pack of 6 M12 threaded rods BATIFIX diameter 12 x 115mm. Threaded rod for chemical fixation by resin injection for hollow or solid materials. The threaded rod must be used with a sieve for hollow materials only such as the breeze block, hollow brick or the hollow concrete block In the case of solid materials such as concrete, natural stone and solid brick the use of a sieve is useless. The threaded rods are to be chosen according to the weight and dimensions of the object to be fixed. rod must be inserted by a rotational + translational movement avoiding maximum lateral movements. OPERATING INSTRUCTIONS FOR THE INSTALLATION OF THE CHEMICAL SEALING For hollow materials, it is the diameter of the sieve which determines the diameter of the bore. For solid materials it is the diameter of the threaded rod which will be your reference to which it is necessary to add 2mm. To drill the hole to the desired dimensions to dust soig place the resin cartridge and cut off the end (discard the first few centimeters of the mixture) Inject the seal from the bottom of the hole and in sufficient quantity. For hollow materials only: insert the sieve making sure that the centering ring is open, then inject the resin into the sieve and close the centering ring, then insert the threaded rod during the handling time by turning until it reaches the bottom of the sieve. For solid materials it is the same operation but without sieves. As an indication, at a temperature of 5 ° C, the drying time is 50 min, 20 ° C wait 20 min, 30 ° c wait 15 min, and at 35 ° C wait 10min Performance: Diameter: 12 X 115mm Fixing for hollow or solid materials The threaded rod must be used with a sieve for hollow materials only such as the breeze block, hollow brick or hollow block. The solution of the chemical sealing is very robust and allows to fix heavy objects Weight of the threaded rod: 100g Condition: 6 Threaded rods in individual bag