Plasti Dip Silver Metallic is flexible and durable. It is resistant to minor impacts, scratches, abrasions, weathering, electrical arcs and even Karcher. Specifications: Colours: silver Finish: metallic Packaging: spray Volume: 400 ml tensile strength (ASTM D - 638 2 6 daN / m²): excellent elongation (ASTM D - 638): 430% cut resistance (ASTM D - 1044): excellent Abrasion stone: excellent chemical resistance to acids, alkaline products, sea water solutions basic chlorine or caustic ammonia: excellent chemical resistant to oil powers and acetone: low insulating properties according to ASTM D - 149: 1200 V / mm Operating temperature: - 34 ° C to + 93 ° C shore A hardness ( according to ASTM D - 2240): 70 Viscosity at 25 °: from 80 to 100 Krebs Units Resistance to salt spray (ASTM B - 117): greater than 1000 hours weather resistance (according to ASTM G - 53): 7 to 10 years permeability to dust (according to ASTM E - 96): 0.03 grains / square foot / hour. Coverage: 3m2 Opacity (tested with black): Achievement with 4 layers antiskid properties: excellent Use Plasti Dip products safely. Before use, read the label and product information.
Products specifications
Size (L / ml / g / gal /oz) | 400ml |
Application | Dries in 30 minutes in the open air and is easily removed without damage to the paintings. Directions: Shake vigorously for at least 1 minute. Spray the surface to be treated in a back and forth motion and at a distance of 20 to 30 cm. Wait at least 30 minutes between each layer. Apply as many layer as needed (a minimum of 3 coats recommended). Wait at least 4 hours for complete drying. |
Spray colour | Silver |