molding resin Soloplast like gel coat white 500gr

Necessary to sealing and perfect finish in the polyester parts manufacturing, the white gel coat resin molding Soloplast is very thick and creamy. Delivered with hardener included MEC, it will always remain sticky to allow a perfect bond with the resin and fiberglass. Features: Gel Resin coat polyester Very thick creamy color: white Capacity: 500 gr hardener MEC included Pot life at 20 C after adding 2 to 3% of catalyst: 10 to 15 minutes used per m2: 600 gr about Hardening at 20 C before lamination at least 6 hours to brush Application Benefits: Stable to light Thixotrope (does not run), nonporous Isophtalic (water resistant) Tips: Resin-based brush. After waxed and polished mold with wax or spray demoulding, apply molding gel coat in a single layer avoiding thick brush marks. To facilitate application, you can keep lying brush without much support. It is even better to be oversize. Preserve the product in closed box of origin is at least 6 months at 20 C. Use Soloplast products safely. Before use, read the label and product information.