Motorized pulley 250A 12V FW250EA12H - Harken

250A 12V motorized pulley Ref. FW250EA12H part Ø Cording (mm) 10 mm Ø Cording (in) 3/8 in Little clutter, the Flatwinder Harken electric pulley is dedicated to setting the Grand-Voule trolley. This powerful and simple to use model constitutes a precious tool in terms of control of the mainsail since it allows it to be unloaded quickly and to delay the risk taking when the wind is forced. Like a compact captive winch, the Flatwinder electric pulley is completely independent. Operating in both directions, it allows the movement of the cart to the whole rail while giving off the listening to the cockpit floor. To save space, Harken recommends the installation of two digital 2 functions, one on a port, the other in starboard, for an order from the pulley on both sides of the sailboat. The large diameter training rein is mounted on an inclined base forming an angle with the top of the rea in order to maintain the rope and prevent it from force against the walls of the pulley. The friction resulting from the gradual restraint of listening is studied to limit the wear of rope and components at least. The electric pulley also avoids the use of winchs, thus releasing space on the deck and facilitating navigation. The compact horizontal engine, housed under the bridge, displays a maximum workload of 250 kg. When the pulley is associated with listening 10 mm in diameter and a 4 -strand hoist, this translates into a traction force of around 1000 kg. The speed of the out -of -load rope is 35 m/min. A 2 -functions Harken relay box is supplied with the pulley. Embarking a load limiter, it offers an appreciable space gain and is easier to install than the systems requiring separate overload protection since it divides the number of cables required by two. The Flatwinder electric pulley is suitable for monocoques from 15 to 18 m and catamarans from 14 to 15 m. It is available in 12 V and 24 V. Switches and circuit breakers are not included. Specifications Weight (kg) 12.5 kg Weight (LB) 27.5 LB Screw (mm) M6 SH MM Ø Fixing (mm) 125 mm Ø Fixing (in) 4 15/16 in Maximum workload (kg) 250 kg Maximum workload 550 lb Number of fixings 6 A (mm) 192 mm A (in) 7 9/16 in B (mm) 226 mm B (in) 8 7/8 in C (mm) 130 mm C (in) 5 1/8 in D (mm) 45 mm D (in) 1 13/16 in E (mm) 43 mm E (in) 1 3/4 in F (mm) 155 mm END) 6 1/8 in G (mm) 227 mm G (in) 8 15/16 in Cordering input height (mm) 29 mm Entrance height of the rope (IN) 1 1/8 in H (in) 12 11/16 in Hmm) 322 mm Ø Cordage (mm) 10 mm Ø Cordage (in) 3/8 in Rope speed (without load) (m/min) 35 m/miin Rope speed (without load) (ft/min) 115 FT/min The technical files of the Harken Pulley Motorized Pulley 250A 12V FW250EA12H can be downloaded here