Motorized pulley 500A 12V FW500EA12H - Harken

500A 12V motorized pulley Available in 12V and 24 V Ref. FW500EA12H Ø Cording (mm) 10 mm Ø Cording (in) 3/8 in Little size, the Flat Winder Winder Harken electric pulley is dedicated to setting the Grand Voile trolley. This powerful and simple to use model constitutes a precious tool in terms of control of the mainsail since it allows it to be unloaded quickly and to delay the risk taking when the wind is forced. Like a compact captive Winch, the Flat Winder electric pulley is completely independent. Operating in both directions, it allows the movement of the cart to the whole rail while giving off the listening to the cockpit floor. To save space, Harken recommends the installation of two digital 2 functions, one on a port, the other in starboard, for an order from the pulley on both sides of the sailboat. The large diameter training rein is mounted on an inclined base forming an angle with the top of the rea in order to maintain the rope and prevent it from force against the walls of the pulley. The friction resulting from the gradual restraint of listening is studied to limit the wear of rope and components at least. The electric pulley also avoids the use of winchs, thus releasing space on the deck and facilitating navigation. The compact horizontal engine, housed under the bridge, displays a maximum workload of 250 kg. When the pulley is associated with listening 10 mm in diameter and a 4 -strand hoist, this translates into a traction force of around 1000 kg. The speed of the out -of -load rope is 35 m/min. A 2 -functions Harken relay box is supplied with the pulley. Embarking a load limiter, it offers an appreciable space gain and is easier to install than the systems requiring separate overload protection since it divides the number of cables required by two. The Flatwinder electric pulley is suitable for monocoques from 15 to 18 m and catamarans from 14 to 15 m. It is available in 12 V and 24 V. Switches and circuit breakers are not included. Specifications Weight (kg) 22.5 kg Weight (LB) 49.6 LB Screw (mm) M6 SH MM Ø Fixing (mm) 160 mm Ø Fixing (in) 6 5/16 in Maximum workload (kg) 500 kg Maximum workload 1100 lb Number of fixings 6 A (mm) 242 mm A (in) 9 1/2 in B (mm) 273 mm B (in) 10 3/4 in C (mm) 152 mm C (in) 6 in D (mm) 53 mm D (in) 2 1/16 in E (mm) 71 mm E (in) 2 13/16 in F (mm) 231 mm END) 9 1/8 in G (mm) 363 mm G (in) 14 5/16 in Cordering input height (mm) 29 mm Entrance height of the rope (IN) 1 1/8 in H (in) 19 1/16 in Hmm) 484 mm Ø Cordage (mm) 10 mm Ø Cordage (in) 3/8 in Rope speed (without load) (m/min) 26 m/miin Rope speed (without load) (ft/min) 85 ft/min The technical files of the Harken 500A 12V FW500EA12H motorized pulley can be downloaded here