Neoprene glue hardener 2402 - 1L - Bostik

Neoprene glue hardener on BOSTIK 2402 Special rubber metal 1L. Contact cement with high performance separate hardener is applied with a brush on natural rubber, neoprene, nitrile, Hypalon and laminate. It is used after printing with primary metals. Features: Neoprene glue 2402 and hardener Colour: Cream Packaging: 1L + glue hardener 40ml Minimum temperature: + 15 ° C Drying time: about 10 minutes maximum open time: 45 minutes depending on the porosity of media, temperature and relative humidity (70% HR max) Life in mixing pot: 2 hours mixing ratio: used after mixing with 4.5 wt% of hardener Advantages: Excellent adhesion on metals High resistance to tearing and Without temperature tolène Tips: media substrates must be sound, dry, clean, dust, degreased and non - friable. User Application: using a brush or a fine notched trowel. Placing an even layer of glue on each side to assemble. Let dry solvent 10 to 15 minutes. Contacting the glued surfaces by exerting strong pressure for a few seconds (15 - 20 seconds). The decision is immediate and does not allow readjustment. On porous materials, it is advisable to deposit a first layer of glue and let dry for at least an hour. The optimal resistance is obtained after about 24 hours. Use Bostik products safely. Before use, read the label and product information.