Pack of 12 Silicone putties SIKA Sikaseal 109 Carpentry - Grey - 300ml

Pack of 12 SIKA Sikaseal 109 Carpentry Silicone Putty - Grey - 300ml, usable indoors and outdoors, this silicone putty is easy to apply and will suit all your renovation or new work. Insensitive to weathering after polymerisation, it will resist the hazards of ageing. Advantages : Adhesion that does not require a primer on most substrates. Very low odour Easy application and smoothing Don't run away Remains flexible even at low temperatures Insensitive to weathering after polymerization Features : Density: approx. 1.01 Application temperature : +5C to +40C Curing speed: approx. 2 mm in 24 hours at + 23 C and 50 % RH Skin formation time: approx. 35 minutes at + 23 C and 50 % RH Colour: grey Packaging : 300ml Reference : 525040x12 Packaging : 1x Set of 12 SIKA Sikaseal silicone putties Tips : SUPPORT Substrates must be cohesive, sound, clean and dry. In all cases of use, the substrates and joint lips must be cleaned of all non- or poorly adherent parts and of any product that may affect the adhesion of the sealant (grease, oil, dust). APPLICATION Respect the DTU 44.1. In particular, do not make joints less than 5 mm wide. Use a Sika JOINT FUEL installed with non-cutting tools to avoid damaging its surface. Apply the sealant in a continuous joint using a manual, pneumatic or electric gun, avoiding any air inclusion. Tighten the sealant carefully against the joint lips. Then smooth with a brush moistened with slightly soapy water, if necessary, before a skin forms. Use Sika products with care. Before use, please refer to the manufacturer's product manual available on the sika.co.uk website.