Pack of 12 Silicone putties SIKA Sikaseal 109 Carpentry - White PVC - 300ml

Pack of 12 SIKA Sikaseal 109 Carpentry silicone sealant - White PVC - 300ml, a single-component neutral silicone sealant, a multi-purpose and multi-substrate product ideal for making joints in interior or exterior joinery, glass-glass work, this product is suitable for both new and renovation work. Easy to apply and smooth, it does not leak. Advantages : Adhesion that does not require a primer on most substrates. Very low odour Easy application and smoothing Don't run away Remains flexible even at low temperatures Insensitive to weathering after polymerization Features : Density: approx. 1.01 Application temperature : +5C to +40C Curing speed: approx. 2 mm in 24 hours at + 23 C and 50 % RH Skin formation time: approx. 35 minutes at + 23 C and 50 % RH Colour: white PVC Packaging : 300ml Reference : 525037x12 Packaging : Set of 12 SIKA Sikaseal silicone putties Tips: SUPPORT Substrates must be cohesive, sound, clean and dry. In all cases of use, the substrates and joint lips must be cleaned of all non- or poorly adherent parts and of any product that may affect the adhesion of the sealant (grease, oil, dust). APPLICATION Respect the DTU 44.1. In particular, do not make joints less than 5 mm wide. Use a Sika JOINT FUEL installed with non-cutting tools to avoid damaging its surface. Apply the sealant in a continuous joint using a manual, pneumatic or electric gun, avoiding any air inclusion. Tighten the sealant carefully against the joint lips. Then smooth with a brush moistened with slightly soapy water, if necessary, before a skin forms. Use Sika products with care. Before use, please refer to the manufacturer's product manual available on the sika.co.uk website.