Pack UHU Power Pistol - 2 cartridges of Polymax Instant Set Mastic White - 2x425 g

Very useful for bonding, sealing and plugging on a wide range of materials, this UHU pack contains a Power Pistol cartridge gun and two cartridges of Polymax instant-setting mastic adhesive. The heavy-duty Power Pistol putsty gun makes applying silicone precise and easy. Polymax Instant Set Mastic Adhesive White is designed for a very strong initial set and high speed resistance. The product can be used on the vast majority of materials (glass, stone, iron, aluminum, steel and many others) and also on many substrates, whether smooth, porous or non-porous. After the work is done, the adhesive is odorless and invisible, and is resistant to extreme temperatures, water, UV and weather. Not suitable for PE, PP, PTFE and bitumen. Be careful when gluing on plastic, a test is necessary to know the adhesion. Advantages : Polymax is a universal adhesive with SMP polymer technology Can be used indoors and outdoors Temperature resistant from -40C to +100C Water, UV and weather resistant Excellent adhesion without primer Permanent elasticity 100% adhesive (non-shrink) Solvent-free, acid-free: odorless Initial set in 10 seconds and final set in 4 hours Characteristics: Density: 1.53 g/cm Color: white Color: white Base material: Silane modified polymers Initial set after 30 minutes (may vary depending on circumstances) Final strength after 4 hours (may vary depending on circumstances) Touch dry time: 5-10 min Temperature resistance: 100 to -40C Cartridge weight: 2 x 425 g Ref. 48503-33868x2 Instructions for use : Power Pistol: Place the cartridge by pressing the small lever at the back of the gun and pull the metal rod of the ladder hook all the way back Slide the nozzle through the ring on the front and place the cartridge in its holder Pull the trigger until the glue or sealant comes out of the nozzle As soon as the trigger is released, no more product comes out of the cartridge thanks to the immediate stop system. To remove the cartridge from the gun, press again on the small lever and pull the metal rod backwards then remove the cartridge Transparent fixing putty: Gluing and assembling: Apply glue in strips or dots (every 1-4 cm). Always apply adhesive at corners and along edges Assemble materials in the right place within 1 minute and press firmly or tap lightly with a rubber hammer Prop or support heavy materials for 4 hours if necessary Can be worked after 2 hours; the joint will be strong enough to be transported or subjected to light loading Maximum final strength is reached after approx. 4 hours, depending on substrate and ambient conditions Sealing : Inject the sealant evenly into the joint and smooth within 1 minute with a spatula or wet finger (preferably) with soapy water Smooth vertical joints from bottom to top Film after approx. 15 minutes Complete hardening after a few days (depending on the thickness of the adhesive layer) When covering with alkyd paint, it is possible that the paint dries more slowly Packaging: One UHU Power Pistol pack - 2 cartridges Polymax Instant Set Adhesive White - 2x425 gDelivered in its original packaging