G - 120 is a highly effective coating solution for almost all glass and ceramic surfaces with long - term effect of easy - to - clean and protection. By producing a water - oil - and dirt - repellent coating, G - 120 reduces new contamination by up to 70%. Due to a massive reduction of dirt adhesion, aggressive cleaning agents are no longer necessary and sensitive surfaces will be therefore less stressed. The "Easy - to - Clean" effect leads to a significant reduction of effort and cost for cleaning: even the most persistent dirt residues such as lime and dirt can be removed easily with a wet microfiber cloth. If necessary, additional mild cleaning agents (without abrasives) can be used.
Products specifications
Detailed Specifications | G-120 is based on a silicon coating technology |
Colour | Transparent |
BIO / Non BIO | non BIO |
Other Information | UN1219 - Please request a quotation as this product can not be shipped in certain countries. |
Size (L / ml / g / gal /oz) | 250ml |
Application | DO NOT APPLY ON HOT SURFACE 1. Preparation / Cleaning Step 1: Clean the prepared surface using an alkaline base soap (type Eco Wash) to remove organic stains (grease, mold…) Step 2: Clean the prepared surface using an acid base soap (type Alpha) to remove mineral stains (limescale, salt…) Step 3: Before applying the coating, use a clean cloth to wipe the surface. The surface must be completely dry, clean and free of grease before processing. Before coating, remove any form of dirt or contamination from the surface (For heavily contaminated surfaces, a glass polish is recommended) 2. Coating Shake the bottle before use! G-120 needs to be sprayed evenly on the surface (approximately 10ml per sqm) and spread immediately with a clean and dry microfibre cloth evenly. A very light misting will appear indicating that the process was performed correctly. Polish the misting out until you don’t see any marks or streaks. Do not touch for at least 2 hours. The coating reaches its maximum hardness after 48 hours. Avoid cleaning the surface until then. Don’t apply on hot surfaces or in direct sun! |