Pipe repair kit (2 unit pack), pipe tape and putty - Wencon

Manufacturer: Wencon
Be the first to review this product
Manufacturer part number: 1047
Vendor: ConceptSRP
€208.70
i h
The Wencon Pipe Repair Kit contains Wencon Putty, repair bandages, gloves and plastic bags. Wencon Putty is a very quick curing, two component, epoxy compound supplied in a practical stick format, which is easy to use. This multipurpose epoxy paste is ideal for a wide range of emergency repairs where an ultra quick curing and moldable compound is required. Typical applications are patching sealing and filling of cracks, leakages and holes in pipes, on flanges, in tanks etc Cures in 10 - 20 minutes Simple apply procedure with cut and knead Patches and seals cracks, leakages and holes Strong adhesion to all metal surfaces Fully machinable
Products specifications
Other InformationInstructions, for use.
Detailed SpecificationsPipe Repair Kit Application areas Typcal applications are repairs in piping carrying water, oil, steam, most gases and even solvents. Wencon Pipe Tape has good pressure, temperature and chemical resistance.
ColourNatural
ApplicationPipe pressure without Wencon Putty: 10 Bar (145 p.s.i.) *) Pipe pressure with Wencon Putty: 50 Bar (725 p.s.i.) *) Flexural strength: ASTM D709 111 N/mm². Tensile strengt: ASTM D638 172 N/mm². (15,800 p.s.i.) Compression strength: ASTM D695 180 N/ mmsq. (25,600 p.s.i.) Adhesion at one-inch single overlap: 19 N/ mm². Dielectric strength: 16 KV/mm² Shear adhesion: 19 N/mm² (ASTM D1002) TEMPERATURE RESISTANCE Continuous: 120°C (248°F) Peak: 190°C (374°F) CHEMICAL RESISTANCE The Pipe Tape is resistant to oil, water, salt water and most diluted acids and alkalis as well as a range of solvents
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews