Plasti Dip gloss spray paint finish 400ml

Manufacturer: Plasti Dip
Manufacturer part number: 17910
GTIN: 75815112125
€12.90
i h
Plasti Dip glossy 400ml aerosol paint finish, which looks like an ultra-resistant liquid elastomer coating and can be applied to all supports without any preparation other than simple degreasing. This finish is resistant to scratches, light impacts, scratches, abrasions, weathering, electric arcs and even Karcher. The spray paint finish dries in 30 minutes in the open air and can be removed very easily without damaging the paint. Application : The Plasti Dip is used to protect, seal, identify, insulate, cover, decorate, phonically and electrically, waterproof... in a wide variety of sectors such as aeronautics, automotive, watchmaking, etc... Instructions for use : Shake vigorously for at least 1 minute as soon as the ball starts to move. Spray the surface to be treated in a back and forth movement at a distance of 20 to 30 cm. Wait at least 30 minutes between coats Apply as many coats as necessary (a minimum of 3 coats is recommended) Wait at least 4 hours for complete drying. Tips for use : Hide the parts to be protected if necessary Use the aerosol in dry, windless conditions in a well-ventilated area. Store the aerosol in a dry place. Use the aerosol only for its intended purpose. Features : Color : Transparent Finish: glossy Packaging: spray Capacity: 400 ml Tensile strength (according to ASTM D-638 2.6 daN/m): excellent Elongation (according to ASTM D-638): 430%. Cut resistance (according to ASTM D-1044): excellent Stone abrasion: excellent Chemical resistance to acids, alkalis, sea water, chlorine or caustic ammonia solutions: excellent. Chemical resistance to oil and acetone: low Insulating properties according to ASTM D-149: 1200 V/mm Operating temperature: from -34C to +93C Shore A hardness (according to ASTM D-2240): 70 Viscosity at 25: from 80 to 100 Krebs Units Salt spray resistance (according to ASTM B-117): over 1000 hours Weather resistance (according to ASTM G-53): 7 to 10 years Dust permeability (according to ASTM E-96): 0.03 grains / square foot / hour Coverage: 3m2 Anti-slip power: excellent Use Plasti Dip products with care. Read the label and product information before use.
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews