Plasti Dip paint finishing spray 400ml brilliant

Paint finish Plasti Dip Spray 400ml bright, which is in such an elastomeric coating ultra resistant liquid and that applies to all media without preparation other than a degreasing. This finish resists scratches, to light impact, scratches, abrasion, weathering, electrical arcs and even Karcher. Dry spray paint finish in 30 minutes in the open air and is easily removed without damage to the paintings. Application: Plasti Dip is used to protect, seal, identify, isolate, cover, decorate, acoustically and electrically seal ... in very diverse sectors such as aeronautics, automotive, watches, etc. Directions: Shake vigorously for at least 1 minutes when the ball starts moving Spray the surface to be treated in a back and forth at a distance of 20 to 30 cm Wait at least 30 minutes between each layer apply as many layer as needed (a minimum of 3 coats recommended) Wait at least 4 hours to complete drying Directions: Hide possibly the parties to protect use the aerosol dry sheltered from the wind in a well ventilated place Keep the spray in a dry place Do not use aerosol for the intended use Specifications: Color: Clear Finish: brilliant Packaging: spray Volume: 400 ml tensile strength (ASTM D-638 2 6 daN / m): excellent elongation (ASTM D-638): 430% cut resistance (ASTM D-1044): excellent Abrasion stone: excellent chemical resistance to acids, alkaline products, sea water solutions basic chlorine or caustic ammonia: excellent chemical resistant to oil powers and acetone: low insulating properties according to ASTM D-149: 1200 V / mm Operating temperature: -34 C to + 93 C shore A hardness ( according to ASTM D-2240): 70 Viscosity at 25 : from 80 to 100 Krebs Units Resistance to salt spray (ASTM B-117): greater than 1000 hours weather resistance (according to ASTM G-53): 7 to 10 years permeability to dust (according to ASTM E-96): 0.03 grains / square foot / hour Coverage: 3m2 antiskid properties: excellent Use Plasti Dip products safely. Before use, read the label and product information.