Plasti Dip spray paint finish Metallic multi-color 400ml

Manufacturer: Plasti Dip
Manufacturer part number: 11271-6
GTIN: 3700812014246
€37.90
i h
Paint finish Anthracite Metallic aerosol Plasti Dip 400ml, which is presented as an ultra resistant elastomeric coating liquid which is applied to all media by giving adhesion to the surface. This finish resists scratches, to light impact, scratches, abrasion, weathering, electrical arcs and even Karcher. Dry spray paint finish in 30 minutes in the open air and is easily removed without damage to the paintings. Application: Plasti Dip is used to protect, seal, identify, isolate, cover, decorate, acoustically and electrically seal ... in very diverse sectors such as aeronautics, automotive, watches, etc. Directions: Shake vigorously for at least 1 minutes when the ball starts moving Spray the surface to be treated in a back and forth at a distance of 20 to 30 cm Wait at least 30 minutes between each layer apply as many layer as needed (a minimum of 3 coats recommended) Wait at least 4 hours to complete drying Directions: Hide possibly the parties to protect use the aerosol dry sheltered from the wind in a well ventilated place Keep the spray in a dry place Do not use aerosol for the intended use Specifications: Color: multi-color Finish: metallic Packaging: spray Volume: 400 ml tensile strength (ASTM D-638 2.6 daN / m): excellent elongation (ASTM D-638): 430% cut resistance (ASTM D-1044): excellent Abrasion stone: excellent chemical resistance to acids, alkaline products, sea water, solutions containing chlorine or caustic ammonia: excellent chemical resistant to oil powers and acetone: low insulating properties according to ASTM D-149: 1200 V / mm Operating temperature: -34 C to + 93 C shore hardness A (according to ASTM D-2240): 70 Viscosity at 25 : from 80 to 100 Krebs Units Resistance to salt spray (ASTM B-117): greater than 1000 hours weather resistance (according to ASTM G-53): 7 10 years permeability dust (according to ASTM E-96): 0.03 grains / square foot / hour Coverage: 3m2 Opacity (tested with black): Achievement with 4 layers antiskid properties: excellent Use Plasti Dip products safely . Before use, read the label and product information.
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews