Polyester Chemical fixation Polifix SF + 300ml mixing nozzles X5

Chemical fixation Polyester Polifix SF 300ml + mixing nozzles x 5 polyester resin without Styrene for chemical sealing in the hollow or solid Ideal material for fixing heavy items such as shutters, gates, gate, stairs, drapes, light sign, hot water storage tank , fixtures, parables ... Use: positioning the cartridge in a caulking gun, remove the cap, screw the mixing tip to pump out a mortar net and check that the mixture is homogeneous (beige) and then inject directly depending on the dosage required USER INSTALLATION oF SEALING CHEMICAL for hollow materials, the diameter of the sieve that determines the hole diameter for solid materials is the diameter of the threaded rod which will be your reference which must be added 2mm Drill hole to size soignesement dust off the air blowing through the holes Place the resin cartridge and cut off the end (discard the first mix centimeter) Inject the seal starting from bottom of hole and sufficient for hollow materials only: insert the screen, ensuring that the centering ring is opened and the resin injected into the sieve and close the centering ring, then insert the threaded rod during the handling time turning until it reaches the bottom of the screen to solid materials is the same process but without the screen indication, at a temperature of 5 C, the drying time is 50 min, 20 C. wait 20 min at 30 c wait 15 minutes, and 35 C wait 10min Performance: Special hollow materials but also suitable for solid materials: beige Reusable Without Styrene Without degradation of the support Certified specifications SOCOTEC N CAZ0849 / 1 European technical Approval for hollow body (ETAG 029) the chemical sealing solution is very robust and allows to fix heavy objects Application temperature: between -5 and 35 C. setting time before setting load if ambient temperature -5 C = 90min; 5 to 10 C = 30min; 15 to 35 C = 20 min loads panel with M10 threaded rod: 150kg for hollow concrete block; 50kg for the clay tiles; 890kg for concrete 25MPa (values are given for information) Weight: 530g Conditionement: 5 Tubes 300ml + 5 mixing nozzles Use Batifix products safely. Before use, read the label and product information.