Polyester resin eco - 500g - Yachtcare

Manufacturer: Soloplast
Be the first to review this product
Manufacturer part number: 127951
Vendor: Espace-Bricolage
€14.29
i h
Polyester resin - type eco Soloplast 500g, ready for use after adding the catalyst MEC. Its color changes from blue to green, about 2 minutes after this addition. After 10 to 15 minutes, the coloring disappears and the resin becomes slightly amber. It is used with glass mat or glass fabric. Features: Polyester resin - type eco Soloplast For recovery, consolidation and molding with limited emanation of styrene Pre accelerated, thixotropic (does not run) and optical control (changes color after adding the catalyst MEC). Contents: 500g hardener MEC included Pot life: 20 minutes at 20 ° C with 3% MEK Before use, read the label and product information.
Products specifications
Other InformationTips: ECO resin is applied by hand with a lambswool roller or brush Remove air bubbles with a roller between several ébulleur layers, you can work wet on wet consumption of resin per m2 is equal to 3 times the mat weight of glass or 2 times for fabrics on a clean, dry, degreased and rough, a first coat of catalyzed resin, plating glass reinforcement then soak it up to translucency and so on according to need. Hard wood, metal or stone, provide the primer Hooking G4. The conservation of the boxed product of close origin is at least 6 months at 20 ° C Keep the product out of the reach of children, do not breathe vapor and avoid contact with eyes Use Soloplast products safely.
Size (L / ml / g / gal /oz)500g
Advantagesa) reinforced with fiberglass: recoveries, casts and were leaving b) with loads: for castings and Give fills a dry to the touch easy to clean with acetone
0 review(s)
0.0 0
Write your own review Close
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
Only registered users can write reviews